Snow Guards for metal roofing is our main business. This is a comprehensive resource for architects to access product specification sheets, cut sheets, and other useful information for our products. If you have any questions on the information below, please feel free to contact us at 250 517 8000
Snow and ice can dangerously avalanche off of glossy-coated metal roofing. These hazards can be prevented with the installation of snow guards.
Once frozen, precipitation loses its grip on a metal roof and begins a down-hill slide. A row of guards placed along the eave or gutter edge of the roof is not always enough protection against these dangers. Our approach to snow guard placement involves placing snow guards throughout the entire area of the roof to keep snow and ice from initially shifting. If you hold snow and ice in place with an effective snow guard layout, you are able to evenly distribute the load on the roof and snow guards; virtually eliminating the threat of an avalanche. An evenly distributed snow load will preserve the long-term integrity of the structure and snow guard pattern.
Use our Spacing Tool to learn about the placement of snow guards for your project.
U.S. Army Corps of Engineers Commentary on Snow Loads
This document is used by the U.S. Army Corps of Engineers as Technical Instructions for snow loads. Our SnoJax II is found on page 26, however, contrary to the image, we suggest that multiple rows of staggered snow guards be installed throughout the roof to effectively hold snow in place. U.S. Army Corps of Engineers Commentary on Snow Loads (pdf)
Installation Instructions: Snow Guards, VentSavers, Roof Clamp.